The Noise kite from BWS is the #1 surf kite on the market today. The input from our Pro Team of Ian Alldredge, Josh Mulcoy, Ryland Blakeney and Ben Wilson along with our Global Test Team of
over 100 riders has enabled our senior designer Dano See to deliver the best kite he’s produced in 10 years!
The Noise is light, fast and easy-to-use with unmatched simplicity. The Undertow bar is clean, simple and safe. Ride the Noise hooked like Ian, or un-hooked like Ryland,
it’s your choice.
Surf the wave, don’t surf the kite.
Wingtip profile
Fast turning & stable
Sizing label
Each Noise kite has a sizing label for rigging convenience.
Perfect balance
Kite weight is balanced to best down the line drift performance, not compromising construction.
Drift
Canopy profile 'v' kite weight & specific bridle configuration = Superior Drift.
Bar pressure
Lighter and more responsive.
Hooked/unhooked
Smoother consistent pull for all styles of wave riding.
Faster relaunch
Direct rear line relaunch gets you out of trouble fast.
Dacron Trailing edge
Maximum strength in the surf, Trailing edge weight is key for perfectly balanced drift.
2-piece strut
Less seams means less chance of breakage while under pressure.
Reinforced LE seams
Double lapped and glued LE seams for maximum durability.
Canopy Seams
10mm lapped flat seams with tape for the strongest canopy construction.
Material
Noise kites are made from Teijen cloth and DP dacron. These are the highest quality kite materials on the market. Lowest stretch, highest strength and everlasting shine! Dacron is a much stronger, thicker weave material than the canopy cloth. We use this on the Leading edge, struts, Wingtips/attachment areas, and the trailing edge for maximum strength in the surf.
Moulded scuff guards
Specifically designed scuff guards for each wear section of the kite.
Dacron Reinforcements
Dacron is a higher strength material to the Teijen Canopy cloth. We use it in the trailing edge, struts and strut connections and Leading Edge.
5-strut hybrid
The perfect combination for kite structure and stability. The Noise will not fold or stall backwards.
Bridle configuration
Configured for optimum down wind drift, bar pressure, turning and stability.
Canopy weight
The right materials in the right areas of the kite so durability is not compromised over balance.
Canopy profile
The profile shape of the aerodynamics also contributes to the balance. Our profile works HOOKED & UNHOOKED.
Less canopy panels
Less seams, less tear areas.
Short bridle
No canopy raps, minimal tangles.
EPI (Express point inflation)
Pump one location for entire kite inflation.
The Undertow bar
Everything below the bar within reach. Nothing dangling in your face. The cleanest kite control system on the market with the lightest safety release loads to date - 5kg release @ 500kg pull.
Noise Kite
KITE PRICE
- 5M $1199
- 6M $1249
- 8M $1299
- 10M $1349
- 12M $1399
INCLUDED IN THE PACKAGE:
Kite, Undertow Bar, Compression bag, BWS Pump, info guide
PLEASE NOTE: BWS kite sizes are similar to the size above from most other brands. For example - if your currently using a 9m or 10m kite in another brand, and you would like to order a similar Noise kite, you would get the 8m.
KITE SIZING
| size | bar size | line length | wind range(knots) |
|---|---|---|---|
| This guide is based on an 85kg Rider on a 6’ Surfboard. Different wind conditions, rider ability and board design are factors that can affect these ranges of wind. | |||
| 12m | 55cm | 23m | 8-18knt |
| 10m | 55cm | 23m | 12-22knt |
| 8m | 45cm | 23m | 16-28knt |
| 6m | 45cm | 23m | 22-30knt |
| 5m | 45cm | 23m | 28+knt |
| size | bar size | line length | wind range(knots) |
|---|---|---|---|
| This guide is based on a 70kg rider on a 5’10” Surfboard. Different wind conditions, rider ability and board design are factors that can affect these ranges of wind. | |||
| 12m | 55cm | 23m | kite size not recommended |
| 10m | 55cm | 23m | 8-18knt |
| 8m | 45cm | 23m | 12-22knt |
| 6m | 45cm | 23m | 16-25knt |
| 5m | 45cm | 23m | 22+knt |
| size | bar size | line length | wind range(knots) |
|---|---|---|---|
| This guide is based on a 55kg rider on a 5’5” Surfboard. Different wind conditions, rider ability and board design are factors that can affect these ranges of wind. | |||
| 12m | 55cm | 23m | kite size not recommended |
| 10m | 55cm | 23m | kite size not recommended |
| 8m | 45cm | 23m | 10-18knt |
| 6m | 45cm | 23m | 16-22knt |
| 5m | 45cm | 23m | 18+knt |
- Choose your Weight & Board:
clear view system
Nothing in your line of sight to get in the way, drag down your lines or hit you in the face.
Safety leash
With a breaking strength of 250kg your safety leash will not leave you with any unexpected breakages in the surf.
Surf lines
Double the thickness of any competitor our lines are built to last in rough setup areas and withstand high loads from surf abuse.
Removable Donkey Stick
Simple velcro attach. The built in suicide ring is load tested to 500kg for unhooked riding in the surf.
The BIT
Patented Hybrid design pulley with built in passing point for the 'Off switch' safety.
Patent number – 7971829The Wedge
Adjustable stopper ball for convenience when the depower reach is too far.
1-piece bar ends
Complete EVA bar end and float so you won't ding your board or knock out your teeth.
Comfort grip
Extra soft ergonomic grip for longer lasting sessions.
Built in cleat depower
Set your bar height and depower using the depower Tool. The simple cleat and uncleat system offers set as you ride convenience.
Swivel system
Below the bar hand operated swivel, as large pulley devices in your face don’t work and drag your front lines down. The only way to un-spin your lines.
Harness loop safety system
The industry leader. Push away activation, 5kg release load @ 500kg pressure, the highest load to lowest release on the market.
Adjustable loop
Simply unset the screws and customise your loop size.
Off switch
The 'Off Switch' centre routed kite safety system. Simple front line flagging system that passes through the bar for no tangles, 100% depower & re-launchability.
BAR PRICE
- 17” (recommended for 5m, 6m and 8m) $399
- 20” (recommended for 10m and 12m) $399
The engineering of the ‘Undertow’ bar is focused on simplicity and function. Having the entire package of depower, safety AND swivel, under the bar, where it is reachable, offers not one tangling mechanism above the bar. Donkey Dick is included but not pictured.
This bar is only available to customers who purchase a NOISE kite.